Energyplus output variables
I want to get two output results using Energyplus; Surface inside face conduction heat transfer rate per area and surface window net heat transfer rate. I need to get equal values for these two outputs monthly, without any shading controls and effects. I didn't include any input for shading devices but I couldn't get equal values. It seems like in first three floors , values are less while other floors, values are almost same. Also, last two floors again the less values. It's a 20 storey building. I want to demonstrate that without any shading effect, the values are same. How can I solve this problem.
Thanks
Comments
Why would surface conduction heat transfer rate per area be equal to window net heat transfer rate?
I need equal values only for the surface inside face conduction heat transfer rate per area. I didn't mean that surface inside face conduction heat transfer rate per area should be equal to window net heat transfer rate. Sorry I didn't mention it clearly. In my model there are 20 floors. At this moment, there is no shading from surrounding building on my target building. As a result, the outputs for all the 20 levels should be identical. However, the outputs shows different values of outputs for each level of the building. That is my issue.
Thanks