Greetings. There is a major issue with the Openstudio model I am working on. After drawing a door or a window, in the next load it fails to draw the surfaces. Example in the images below. Please ask me if you need additional information and diagnostic files of any kind.
SketchUp 2016 Openstudio 1.10.0
Thank you.
You have drawn a complex multi-story building, but put all of the surfaces (about 500) inside of one space. Each space should, be like an empty shoe box (describing an envelope without any extra internal surfaces). You can can assign multiple spaces to one thermal zone, but you can't take one space, and assign to multiple thermal zones; the closest to that is setting the zone multiplier to a number greater than 1, but I don't think that is what you are trying to do. You don't want to model your building as one zone, at a minimum you want one zone per story, but often modelers will at least break it down to core and perimeter. If I were you, I would probably start over, but you can use your existing geometry as a guide. I can save your geometry into a generic SketchUp model, you can trace it to create your new model. Think about how much detail you want as you are drawing. Also look though some modeling tutorials to learn how OpenStudio and EnergyPlus work.
Something I have noticed about openstudio and its geometry is that it is quite fussy. Here are my tips for drawing in openstudio.
It doesn't directly answer your question, but I thought some tips could help
Thank you very much. I feared so that it was a mistake to make just one space, but it is good to know that this was the mistake and I can start over without making the same mistake.
No need to spend more time with this model if that is the case. I already have a good enough guide for remodeling it and much detail is not needed.
I will try again with more spaces this time, at least a core and a perimeter as you suggested, probably more since just one for the perimeter will probably not be enough as it is indeed a complex building.
Certainbly I need to educate myself more about the programms, but I have no physical person to turn to, so the mistakes escalate. One less to go now though. Another one I did was to forget choosing the surface before drawing the sub-surface.
How did you make the horizontal cut? It is a useful tool that I have not managed to find yet. EDIT: Just found it by googling "sketchup section", with the use of the plane section tool. Nevermind that.
A million thanks again, I will start over and if any issue presents itself I will know who to ask for it.
@Mors please use the add a comment feature for comments instead of the Add Answer section. Feel free to delete this and move, thanks.
Next time I will know then, thanks!
Comments
If you quit SketchUp and then open the OSM using the OpenStudio toolbar do any errors pop up, or does it just stop loading without a message?
You should also try to run the diagnostic script which is described on this post.
Also just for reference looks like the walls on the far side of your courtyard have their face normals reversed, that is why they are a lighter color.
It always pops a ton of errors about missing subsufaces, but there was no problem up until now. Example below.
http://imageshack.com/a/img921/7606/7...
It loads the model, before it finishes loading it stops responding for a while and then it loads the surface-less model. I need to close SketchUp and load a previous save to restore it.
The diagnostic tool removes some subsurfaces but does not solve the issue.
I noticed the reverse coloring too but I am not aware how to fix it. Is it easy for you to describe it or alternatively point me to the manual?
I really appreciate your concern
Select a surface then right click and choose "Reverse Face", if the surface has sub-surfaces, reverse those as well (you can multi-select).
Speaking of sub-surfaces, my recommendation is to start fresh on sub-surfaces by removing them all. From the error dialog it looks like there are many duplicate surfaces and surfaces not contained by their base surface. Save a copy of your model then type the following in the ruby console and hit return. If that doesn't work, email the file to OpenStudio@nrel.gov
Ī¤hank you for your post. The reverse face went just fine. I removed the subsurfaces and it loads much faster without any errors other than this:
"Error: Surface 209 This planar surface shares the same SketchUp face as Surface 274. This error cannot be automatically fixed. The surface will not be drawn."
However the model was also crippled in the process. I guess I could just start over hoping that it will not lag/get corrupted again, but I would also like to ask if it is possible to make many thermal zones in one Openstudio space, since the model is included in one big Openstudio space.
I will send you the initial, the "corrupted" and the "no sub-surface" models to check them, hoping that you have a painless way to fix the model. It is very kind of you to help me since there is absolutely no one else I can turn to for assistance.