I am a newbie just getting started. I can't say for sure if this error will seriously affect the results of the energy consumption simulation, and I don't know how to get rid of it.

 ** Severe  ** CheckWarmupConvergence: Loads Initialization, Zone="F2-N-HYS-KT1" did not converge after 25 warmup days.
 **   ~~~   ** See Warmup Convergence Information in .eio file for details.
 **   ~~~   ** ...Environment(RunPeriod)="RUN PERIOD 1"
 **   ~~~   ** ..Max Temp Comparison = 0.12 vs Temperature Convergence Tolerance=0.40 - Pass Convergence
 **   ~~~   ** ..Min Temp Comparison = 0.12 vs Temperature Convergence Tolerance=0.40 - Pass Convergence
 **   ~~~   ** ..Max Heat Load Comparison = 0.1427 vs Loads Convergence Tolerance=4.00E-002 - Fail Convergence
 **   ~~~   ** ..Max Cool Load Comparison = 0.1016 vs Loads Convergence Tolerance=4.00E-002 - Fail Convergence

A little help is required and much appreciated!

* Severe * CheckWarmupConvergence: Loads Initialization, Zone="F2-N-HYS-KT1" did not converge after 25 warmup days. * ~~~ * See Warmup Convergence Information in .eio file for details. * ~~~ * ...Environment(RunPeriod)="RUN PERIOD 1" * ~~~ * ..Max Temp Comparison = 0.12 vs Temperature Convergence Tolerance=0.40 - Pass Convergence * ~~~ * ..Min Temp Comparison = 0.12 vs Temperature Convergence Tolerance=0.40 - Pass Convergence * ~~~ * ..Max Heat Load Comparison = 0.1427 vs Loads Convergence Tolerance=4.00E-002 - Fail Convergence * ~~~ * ..Max Cool Load Comparison = 0.1016 vs Loads Convergence Tolerance=4.00E-002 - Fail Convergence

I am a newbie just getting started. I can't say for sure if this error will seriously affect the results of the energy consumption simulation, and I don't know how to get rid of it. A little help is required and much appreciated!

* Severe * CheckWarmupConvergence: Loads Initialization, Zone="F2-N-HYS-KT1" did not converge after 25 warmup days. * ~~~ * See Warmup Convergence Information in .eio file for details. * ~~~ * ...Environment(RunPeriod)="RUN PERIOD 1" * ~~~ * ..Max Temp Comparison = 0.12 vs Temperature Convergence Tolerance=0.40 - Pass Convergence * ~~~ * ..Min Temp Comparison = 0.12 vs Temperature Convergence Tolerance=0.40 - Pass Convergence * ~~~ * ..Max Heat Load Comparison = 0.1427 vs Loads Convergence Tolerance=4.00E-002 - Fail Convergence * ~~~ * ..Max Cool Load Comparison = 0.1016 vs Loads Convergence Tolerance=4.00E-002 - Fail Convergence

I am a newbie just getting started. I can't say for sure if this error will seriously affect the results of the energy consumption simulation, and I don't know how to get rid of it. A little help is required and much appreciated!