Hi, Thanks in advance for any advise.

I have run a simple model with geomotry created by sketchup, and I add some simple properties to it,such as weather conditiong, construction set.

And then I ran this model, it seems to be succeed, but failed in the last step.

Like the following picture. https://drive.google.com/file/d/1fSGWLnxloA18zOO0NAb5QolVCaluDVvm/view?usp=sharing

You can check all my documents here.

https://drive.google.com/drive/folders/1WhoFT6pSX0bVFDxu-orOtsSav04ztN9q?usp=sharing, https://drive.google.com/file/d/1Wqgsqdal78XMrPyir8PbLHjBEqAXz_jd/view?usp=sharing

Some of you guys have ran my IDF file, and found no severe errors.@Jim Dirkes

First, I'd like to say it's so kind of you to try your best to help me solve the problem.

But if you guys look into the results of Energyplus carefully, you can find it really wierd.

First, there isn't any ''Building Area'' . https://drive.google.com/file/d/10XxAVkn3TBG8VKK5nnCz_u4jxM9o229u/view?usp=sharing! ](/upfiles/16461112497675422.jpg)

Second, the Envolope part isn't identified by openstutio(or energyplus) too.

As a matter of fact, also no ''Site and Source Energy'' in the model too.

Also, if you ran the osm file which is equal to the IDF file(osm file is converted into IDF file to achieve the goal of building energy simulation).

you may find the reports of Energyplus and Openstutio conflicts. (Don't forget to drag the ''OpenStutio Results'' from the library)

Run the osm file after add the ''OpenStutio Results''.

And it shows that ''Envolope Summary'' fails too(just like what the Energyplus Report said)

Here is the results.

Energyplus Results: https://drive.google.com/file/d/1rRYmQ0fQQsKLYp_58NqJ_9AryQJONdQ4/view?usp=sharing

OpenStutio Results: https://drive.google.com/file/d/1XaXe2R26zT7omXebh7eB1AEJMSToExVO/view?usp=sharing

Thanks.

Hi, Thanks in advance for any advise.

I have run a simple model with geomotry created by sketchup, and I add some simple properties to it,such as weather conditiong, construction set.

And then I ran this model, it seems to be succeed, but failed in the last step.

Like the following picture. https://drive.google.com/file/d/1fSGWLnxloA18zOO0NAb5QolVCaluDVvm/view?usp=sharing

You can check all my documents here.

https://drive.google.com/drive/folders/1WhoFT6pSX0bVFDxu-orOtsSav04ztN9q?usp=sharing, https://drive.google.com/file/d/1Wqgsqdal78XMrPyir8PbLHjBEqAXz_jd/view?usp=sharing

Some of you guys have ran my IDF file, and found no severe errors.@Jim Dirkes

First, I'd like to say it's so kind of you to try your best to help me solve the problem.

But if you guys look into the results of Energyplus carefully, you can find it really wierd.

First, there isn't any ''Building Area'' ! ](/upfiles/16461112497675422.jpg)

Second, the Envolope part isn't identified by openstutio(or energyplus) too.

As a matter of fact, also no ''Site and Source Energy'' in the model too.

Also, if you ran the osm file which is equal to the IDF file(osm file is converted into IDF file to achieve the goal of building energy simulation).

you may find the reports of Energyplus and Openstutio conflicts. (Don't forget to drag the ''OpenStutio Results'' from the library)

Run the osm file after add the ''OpenStutio Results''.

And it shows that ''Envolope Summary'' fails too(just like what the Energyplus Report said)

Here is the results.

Energyplus Results: https://drive.google.com/file/d/1rRYmQ0fQQsKLYp_58NqJ_9AryQJONdQ4/view?usp=sharing

OpenStutio Results: https://drive.google.com/file/d/1XaXe2R26zT7omXebh7eB1AEJMSToExVO/view?usp=sharing

Thanks.Thanks

Hi, Thanks Hi thanks in advance for any advise.

I have run a simple model with geomotry created by sketchup, and I add some simple properties to it,such as weather conditiong, construction set.

And and then I ran this model, it seems to be succeed, but failed in the last step. Like the following picture.

Like the following picture.Here is part of the err. document. https://drive.google.com/file/d/1fSGWLnxloA18zOO0NAb5QolVCaluDVvm/view?usp=sharing

You can check all my documents here.

https://drive.google.com/drive/folders/1WhoFT6pSX0bVFDxu-orOtsSav04ztN9q?usp=sharing, https://drive.google.com/file/d/1Wqgsqdal78XMrPyir8PbLHjBEqAXz_jd/view?usp=sharing

** Warning ** CheckEnvironmentSpecifications: SimulationControl specified doing design day simulations, but no design environments specified.
**   ~~~   ** ...No design environment results produced. For these results, add appropriate SizingPeriod:* objects for your simulation.
** Warning ** ProcessScheduleInput: Schedule:Constant="ALWAYS OFF DISCRETE", Blank Schedule Type Limits Name input -- will not be validated.
** Warning ** ProcessScheduleInput: Schedule:Constant="ALWAYS ON CONTINUOUS", Blank Schedule Type Limits Name input -- will not be validated.
** Warning ** CheckUsedConstructions: There are 32 nominally unused constructions in input.
**   ~~~   ** For explicit details on each unused construction, use Output:Diagnostics,DisplayExtraWarnings;
** Warning ** Output:Meter: invalid Key Name="ELECTRICITY:FACILITY" - not found.
** Warning ** Output:Meter: invalid Key Name="NATURALGAS:FACILITY" - not found.
** Warning ** Output:Meter: invalid Key Name="DISTRICTCOOLING:FACILITY" - not found.
** Warning ** Output:Meter: invalid Key Name="DISTRICTHEATING:FACILITY" - not found.
** Warning ** Output:Meter:MeterFileOnly: invalid Key Name="NATURALGAS:FACILITY" - not found.
** Warning ** Output:Meter:MeterFileOnly: invalid Key Name="ELECTRICITY:FACILITY" - not found.
** Warning ** Output:Meter:MeterFileOnly: invalid Key Name="ELECTRICITY:FACILITY" - not found.

Thanks

Hi thanks in advance for any advise.

I have run a simple model with geomotry created by sketchup, and I add some simple properties to it,such as weather conditiong, construction set.

and then I ran this model, it seems to be succeed, but failed in the last step. Like the following picture.

Here is part of the err. document.

** Warning ** CheckEnvironmentSpecifications: SimulationControl specified doing design day simulations, but no design environments specified.
**   ~~~   ** ...No design environment results produced. For these results, add appropriate SizingPeriod:* objects for your simulation.
** Warning ** ProcessScheduleInput: Schedule:Constant="ALWAYS OFF DISCRETE", Blank Schedule Type Limits Name input -- will not be validated.
** Warning ** ProcessScheduleInput: Schedule:Constant="ALWAYS ON CONTINUOUS", Blank Schedule Type Limits Name input -- will not be validated.
** Warning ** CheckUsedConstructions: There are 32 nominally unused constructions in input.
**   ~~~   ** For explicit details on each unused construction, use Output:Diagnostics,DisplayExtraWarnings;
** Warning ** Output:Meter: invalid Key Name="ELECTRICITY:FACILITY" - not found.
** Warning ** Output:Meter: invalid Key Name="NATURALGAS:FACILITY" - not found.
** Warning ** Output:Meter: invalid Key Name="DISTRICTCOOLING:FACILITY" - not found.
** Warning ** Output:Meter: invalid Key Name="DISTRICTHEATING:FACILITY" - not found.
** Warning ** Output:Meter:MeterFileOnly: invalid Key Name="NATURALGAS:FACILITY" - not found.
** Warning ** Output:Meter:MeterFileOnly: invalid Key Name="ELECTRICITY:FACILITY" - not found.
** Warning ** Output:Meter:MeterFileOnly: invalid Key Name="ELECTRICITY:FACILITY" - not found.

Thanks

Hi thanks in advance for any advise.

I have run a simple model with geomotry created by sketchup, and I add some simple properties to it,such as weather conditiong, construction set.

and then I ran this model, it seems to be succeed, but failed in the last step. Like the following picture.

Here is part of the err. document.

** Warning ** CheckEnvironmentSpecifications: SimulationControl specified doing design day simulations, but no design environments specified.
**   ~~~   ** ...No design environment results produced. For these results, add appropriate SizingPeriod:* objects for your simulation.
** Warning ** ProcessScheduleInput: Schedule:Constant="ALWAYS OFF DISCRETE", Blank Schedule Type Limits Name input -- will not be validated.
** Warning ** ProcessScheduleInput: Schedule:Constant="ALWAYS ON CONTINUOUS", Blank Schedule Type Limits Name input -- will not be validated.
** Warning ** CheckUsedConstructions: There are 32 nominally unused constructions in input.
**   ~~~   ** For explicit details on each unused construction, use Output:Diagnostics,DisplayExtraWarnings;
** Warning ** Output:Meter: invalid Key Name="ELECTRICITY:FACILITY" - not found.
** Warning ** Output:Meter: invalid Key Name="NATURALGAS:FACILITY" - not found.
** Warning ** Output:Meter: invalid Key Name="DISTRICTCOOLING:FACILITY" - not found.
** Warning ** Output:Meter: invalid Key Name="DISTRICTHEATING:FACILITY" - not found.
** Warning ** Output:Meter:MeterFileOnly: invalid Key Name="NATURALGAS:FACILITY" - not found.
** Warning ** Output:Meter:MeterFileOnly: invalid Key Name="ELECTRICITY:FACILITY" - not found.
** Warning ** Output:Meter:MeterFileOnly: invalid Key Name="ELECTRICITY:FACILITY" - not found.

Thanks

Hi thanks in advance for any advise.

I have run a simple model with geomotry created by sketchup, and I add some simple properties to it,such as weather conditiong, construction set.

and then I ran this model, it seems to be succeed, but failed in the last step. Like the following picture.

Here is part of the err. document.

** Warning ** CheckEnvironmentSpecifications: SimulationControl specified doing design day simulations, but no design environments specified.
**   ~~~   ** ...No design environment results produced. For these results, add appropriate SizingPeriod:* objects for your simulation.
** Warning ** ProcessScheduleInput: Schedule:Constant="ALWAYS OFF DISCRETE", Blank Schedule Type Limits Name input -- will not be validated.
** Warning ** ProcessScheduleInput: Schedule:Constant="ALWAYS ON CONTINUOUS", Blank Schedule Type Limits Name input -- will not be validated.
** Warning ** CheckUsedConstructions: There are 32 nominally unused constructions in input.
**   ~~~   ** For explicit details on each unused construction, use Output:Diagnostics,DisplayExtraWarnings;
** Warning ** Output:Meter: invalid Key Name="ELECTRICITY:FACILITY" - not found.
** Warning ** Output:Meter: invalid Key Name="NATURALGAS:FACILITY" - not found.
** Warning ** Output:Meter: invalid Key Name="DISTRICTCOOLING:FACILITY" - not found.
** Warning ** Output:Meter: invalid Key Name="DISTRICTHEATING:FACILITY" - not found.
** Warning ** Output:Meter:MeterFileOnly: invalid Key Name="NATURALGAS:FACILITY" - not found.
** Warning ** Output:Meter:MeterFileOnly: invalid Key Name="ELECTRICITY:FACILITY" - not found.
** Warning ** Output:Meter:MeterFileOnly: invalid Key Name="ELECTRICITY:FACILITY" - not found.

Thanks

Hi thanks in advance for any advise.

I have run a simple model with geomotry created by sketchup, and I add some simple properties to it,such as weather conditiong, construction set.

and then I ran this model, it seems to be succeed, but failed in the last step. Like the following picture.

Here is part of the err. document.

** Warning **  * Warning * CheckEnvironmentSpecifications: SimulationControl specified doing design day simulations, but no design environments specified.
**  *   ~~~   ** * ...No design environment results produced. For these results, add appropriate SizingPeriod:* objects for your simulation.
** Warning **  * Warning * ProcessScheduleInput: Schedule:Constant="ALWAYS OFF DISCRETE", Blank Schedule Type Limits Name input -- will not be validated.
** Warning **  * Warning * ProcessScheduleInput: Schedule:Constant="ALWAYS ON CONTINUOUS", Blank Schedule Type Limits Name input -- will not be validated.
** Warning **  * Warning * CheckUsedConstructions: There are 32 nominally unused constructions in input.
**  *   ~~~   ** * For explicit details on each unused construction, use Output:Diagnostics,DisplayExtraWarnings;
** Warning **  * Warning * Output:Meter: invalid Key Name="ELECTRICITY:FACILITY" - not found.
** Warning **  * Warning * Output:Meter: invalid Key Name="NATURALGAS:FACILITY" - not found.
** Warning **  * Warning * Output:Meter: invalid Key Name="DISTRICTCOOLING:FACILITY" - not found.
** Warning **  * Warning * Output:Meter: invalid Key Name="DISTRICTHEATING:FACILITY" - not found.
** Warning **  * Warning * Output:Meter:MeterFileOnly: invalid Key Name="NATURALGAS:FACILITY" - not found.
** Warning **  * Warning * Output:Meter:MeterFileOnly: invalid Key Name="ELECTRICITY:FACILITY" - not found.
** Warning **  * Warning * Output:Meter:MeterFileOnly: invalid Key Name="ELECTRICITY:FACILITY" - not found.

Thanksfound.