EnergyPlus is giving an error as follows:

** follows:
* Severe  ** <root>[WaterUse:Equipment][Level0:Bedroom [WaterUse:Equipment][Level0:Bedroom Water Outlet] - Missing required property 'peak_flow_rate'.

when the numerical value of the peak flow rate value is replaced by an arithmetic operation using the built-in macro #eval[ ].].

For example when #eval[0.0000067517*1 ] ] is input instead of 0.0000067517 for the peak flow rate, the severe error is output.

Is only a numerical value accepted for this input not a macro?

EnergyPlus is giving an error as follows: * Severe ** [WaterUse:Equipment][Level0:Bedroom Water Outlet] - Missing required property 'peak_flow_rate'.

when the numerical value of the peak flow rate value is replaced by an arithmetic operation using the built-in macro #eval[ ].

For example when #eval[0.0000067517*1 ] is input instead of 0.0000067517 for the peak flow rate, the severe error is output.

Is only a numerical value accepted for this input not a macro?

EnergyPlus is giving an error as follows: * Severe ** [WaterUse:Equipment][Level0:Bedroom Water Outlet] - Missing required property 'peak_flow_rate'.

when the numerical value of the peak flow rate value is replaced by an arithmetic operation using the built-in macro #eval[ ].

For example when #eval[0.0000067517*1 ] is input instead of 0.0000067517 for the peak flow rate, the severe error is output.

Is only a numerical value accepted for this input not a macro?

EnergyPlus is giving an error as follows: * Severe ** [WaterUse:Equipment][Level0:Bedroom Water Outlet] - Missing required property 'peak_flow_rate'.

when the numerical value of the peak flow rate value is replaced by an arithmetic operation using the built-in macro #eval[ ].

For example when #eval[0.0000067517*1 ] is input instead of 0.0000067517 for the peak flow rate, the severe error is output.

Is only a numerical value accepted for this input not a macro?