There's a longer story here, but the short version is:

• I have clearly defined zone loads using the EnergyPlus Lights & OtherEquipment objects. There is ~ZERO envelope load.
• When I check the E+ output, the zone load differs by 14% from my input values. That's too much.
• Here are the details. Can someone give me an idea what would cause this variation?
• Thanks in advance.

There's a longer story here, but the short version is:

• I have clearly defined zone loads using the EnergyPlus Lights & OtherEquipment objects. There is ~ZERO envelope load.
• When I check the E+ output, the zone load differs by 14% from my input values. That's too much.
• Here are the details. Can someone give me an idea what would cause this variation?
• Thanks in advance.

There's a longer story here, but the short version is:

• I have clearly defined zone loads using the EnergyPlus Lights & OtherEquipment objects. There is ~ZERO envelope load.
• When I check the E+ output, the zone load differs by 14% from my input values. That's too much.
• Here are the details. Can someone give me an idea what would cause this variation?
• Thanks in advance.

There's a longer story here, but the short version is:

• I have clearly defined zone loads using the EnergyPlus Lights & OtherEquipment objects. There is ~ZERO envelope load.
• When I check the E+ output, the zone load differs by 14% from my input values. That's too much.
• Here are the details. Can someone give me an idea what would cause this variation?
• Thanks in advance.