Revision history [back]
Change the geometry of building in idf file.
When I use the Multi-family Residential Prototype Building Models, I found that the coordinate of the roof is weird. For example, the coordinate of Roof_left is:
41.122974000000,4.107433182722,7.920000000000, !- X,Y,Z ==> Vertex 1 {m}
41.122974000000,-15.731187000000,7.920000000000, !- X,Y,Z ==> Vertex 2 {m}
41.122974000000,-5.811876908639,12.046992000000; !- X,Y,Z ==> Vertex 3 {m}
But the coordinate of ceiling_unit1_FrontRow_MiddleFloor is:
0.000000000000,0.000000000000,5.332900000000, !- X,Y,Z ==> Vertex 1 {m}
12.178962909315,0.000000000000,5.332900000000, !- X,Y,Z ==> Vertex 2 {m}
12.178962909315,9.157114969410,5.332900000000, !- X,Y,Z ==> Vertex 3 {m}
0.000000000000,9.157114969410,5.332900000000; !- X,Y,Z ==> Vertex 4 {m}
I think the coordinate of Roof_left should be:
0.0,19.8386201827,5.332900000000, !- X,Y,Z ==> Vertex 1 {m}
0.0,0.0,5.332900000000, !- X,Y,Z ==> Vertex 2 {m}
0.0,9.91931009136,5.332900000000; !- X,Y,Z ==> Vertex 3 {m}
Why the Prototype Building Models have this kind of roof coordinate? Following is the link to these Residential Prototype Building Models. https://www.energycodes.gov/development/residential/iecc_models
Change the geometry of building in idf file.
When I use the Multi-family Residential Prototype Building Models, I found that the coordinate of the roof is weird. For example, the coordinate of Roof_left is:
41.122974000000,4.107433182722,7.920000000000, !- X,Y,Z ==> Vertex 1 {m}
41.122974000000,-15.731187000000,7.920000000000, !- X,Y,Z ==> Vertex 2 {m}
41.122974000000,-5.811876908639,12.046992000000; !- X,Y,Z ==> Vertex 3 {m}
But the coordinate of ceiling_unit1_FrontRow_MiddleFloor is:
0.000000000000,0.000000000000,5.332900000000, !- X,Y,Z ==> Vertex 1 {m}
12.178962909315,0.000000000000,5.332900000000, !- X,Y,Z ==> Vertex 2 {m}
12.178962909315,9.157114969410,5.332900000000, !- X,Y,Z ==> Vertex 3 {m}
0.000000000000,9.157114969410,5.332900000000; !- X,Y,Z ==> Vertex 4 {m}
I think the coordinate of Roof_left should be:
0.0,19.8386201827,5.332900000000, !- X,Y,Z ==> Vertex 1 {m}
0.0,0.0,5.332900000000, !- X,Y,Z ==> Vertex 2 {m}
0.0,9.91931009136,5.332900000000; !- X,Y,Z ==> Vertex 3 {m}
Why the Prototype Building Models have this kind of roof coordinate? Following is the link to these Residential Prototype Building Models. https://www.energycodes.gov/development/residential/iecc_models
Change the geometry of building in idf file.
When I use the Multi-family Residential Prototype Building Models, I found that the coordinate of the roof is weird. For example, the coordinate of Roof_left is:
41.122974000000,4.107433182722,7.920000000000, !- X,Y,Z ==> Vertex 1 {m}
41.122974000000,-15.731187000000,7.920000000000, !- X,Y,Z ==> Vertex 2 {m}
41.122974000000,-5.811876908639,12.046992000000; !- X,Y,Z ==> Vertex 3 {m}
But the coordinate of ceiling_unit1_FrontRow_MiddleFloor is:
0.000000000000,0.000000000000,5.332900000000, !- X,Y,Z ==> Vertex 1 {m}
12.178962909315,0.000000000000,5.332900000000, !- X,Y,Z ==> Vertex 2 {m}
12.178962909315,9.157114969410,5.332900000000, !- X,Y,Z ==> Vertex 3 {m}
0.000000000000,9.157114969410,5.332900000000; !- X,Y,Z ==> Vertex 4 {m}
I think the coordinate of Roof_left should be:
0.0,19.8386201827,5.332900000000, !- X,Y,Z ==> Vertex 1 {m}
0.0,0.0,5.332900000000, !- X,Y,Z ==> Vertex 2 {m}
0.0,9.91931009136,5.332900000000; !- X,Y,Z ==> Vertex 3 {m}
Why the Prototype Building Models have this kind of roof coordinate? Following is the link to these Residential Prototype Building Models. https://www.energycodes.gov/development/residential/iecc_models
Change the geometry of building in idf file.
When I use the Multi-family Residential Prototype Building Models, I found that the coordinate of the roof is weird. For example, the coordinate of Roof_left is:
41.122974000000,4.107433182722,7.920000000000, !- X,Y,Z ==> Vertex 1 {m}
41.122974000000,-15.731187000000,7.920000000000, !- X,Y,Z ==> Vertex 2 {m}
41.122974000000,-5.811876908639,12.046992000000; !- X,Y,Z ==> Vertex 3 {m}
But the coordinate of ceiling_unit1_FrontRow_MiddleFloor is:
0.000000000000,0.000000000000,5.332900000000, !- X,Y,Z ==> Vertex 1 {m}
12.178962909315,0.000000000000,5.332900000000, !- X,Y,Z ==> Vertex 2 {m}
12.178962909315,9.157114969410,5.332900000000, !- X,Y,Z ==> Vertex 3 {m}
0.000000000000,9.157114969410,5.332900000000; !- X,Y,Z ==> Vertex 4 {m}
I think the coordinate of Roof_left should be:
0.0,19.8386201827,5.332900000000, !- X,Y,Z ==> Vertex 1 {m}
0.0,0.0,5.332900000000, !- X,Y,Z ==> Vertex 2 {m}
0.0,9.91931009136,5.332900000000; !- X,Y,Z ==> Vertex 3 {m}
Why the Prototype Building Models have this kind of roof coordinate? Following is the link to these Residential Prototype Building Models. https://www.energycodes.gov/development/residential/iecc_modelscoordinate?
Change the geometry of building in idf file.
When I use the Multi-family Residential Prototype Building Models, I found that the coordinate of the roof is weird. For example, the coordinate of Roof_left is:
41.122974000000,4.107433182722,7.920000000000, !- X,Y,Z ==> Vertex 1 {m}
41.122974000000,-15.731187000000,7.920000000000, !- X,Y,Z ==> Vertex 2 {m}
41.122974000000,-5.811876908639,12.046992000000; !- X,Y,Z ==> Vertex 3 {m}
But the coordinate of ceiling_unit1_FrontRow_MiddleFloor is:
0.000000000000,0.000000000000,5.332900000000, !- X,Y,Z ==> Vertex 1 {m}
12.178962909315,0.000000000000,5.332900000000, !- X,Y,Z ==> Vertex 2 {m}
12.178962909315,9.157114969410,5.332900000000, !- X,Y,Z ==> Vertex 3 {m}
0.000000000000,9.157114969410,5.332900000000; !- X,Y,Z ==> Vertex 4 {m}
I think the coordinate of Roof_left should be:
0.0,19.8386201827,5.332900000000, !- X,Y,Z ==> Vertex 1 {m}
0.0,0.0,5.332900000000, !- X,Y,Z ==> Vertex 2 {m}
0.0,9.91931009136,5.332900000000; !- X,Y,Z ==> Vertex 3 {m}
Why the Prototype Building Models have this kind of roof coordinate?
Change the geometry of building in idf file.
When I use the Multi-family Residential Prototype Building Models, I found that the coordinate of the roof is weird. For example, the coordinate of Roof_left is:
41.122974000000,4.107433182722,7.920000000000, !- X,Y,Z ==> Vertex 1 {m}
41.122974000000,-15.731187000000,7.920000000000, !- X,Y,Z ==> Vertex 2 {m}
41.122974000000,-5.811876908639,12.046992000000; !- X,Y,Z ==> Vertex 3 {m}
But the coordinate of ceiling_unit1_FrontRow_MiddleFloor is:
0.000000000000,0.000000000000,5.332900000000, !- X,Y,Z ==> Vertex 1 {m}
12.178962909315,0.000000000000,5.332900000000, !- X,Y,Z ==> Vertex 2 {m}
12.178962909315,9.157114969410,5.332900000000, !- X,Y,Z ==> Vertex 3 {m}
0.000000000000,9.157114969410,5.332900000000; !- X,Y,Z ==> Vertex 4 {m}
I think the coordinate of Roof_left should be:
0.0,19.8386201827,5.332900000000, !- X,Y,Z ==> Vertex 1 {m}
0.0,0.0,5.332900000000, !- X,Y,Z ==> Vertex 2 {m}
0.0,9.91931009136,5.332900000000; !- X,Y,Z ==> Vertex 3 {m}
Why the Prototype Building Models have this kind of roof coordinate?
Change the geometry of building in idf file.
When I use the Multi-family Residential Prototype Building Models, I found that the coordinate of the roof is weird. For example, the coordinate of Roof_left is:
41.122974000000,4.107433182722,7.920000000000, !- X,Y,Z ==> Vertex 1 {m}
41.122974000000,-15.731187000000,7.920000000000, !- X,Y,Z ==> Vertex 2 {m}
41.122974000000,-5.811876908639,12.046992000000; !- X,Y,Z ==> Vertex 3 {m}
But the coordinate of ceiling_unit1_FrontRow_MiddleFloor is:
0.000000000000,0.000000000000,5.332900000000, !- X,Y,Z ==> Vertex 1 {m}
12.178962909315,0.000000000000,5.332900000000, !- X,Y,Z ==> Vertex 2 {m}
12.178962909315,9.157114969410,5.332900000000, !- X,Y,Z ==> Vertex 3 {m}
0.000000000000,9.157114969410,5.332900000000; !- X,Y,Z ==> Vertex 4 {m}
I think the coordinate of Roof_left should be:
0.0,19.8386201827,5.332900000000, !- X,Y,Z ==> Vertex 1 {m}
0.0,0.0,5.332900000000, !- X,Y,Z ==> Vertex 2 {m}
0.0,9.91931009136,5.332900000000; !- X,Y,Z ==> Vertex 3 {m}
Why the Prototype Building Models have this kind of roof coordinate?
Change the geometry of building in idf file.
When I use the Multi-family Residential Prototype Building Models, I found that the coordinate of the roof is weird. wired. For example, the coordinate of Roof_left
41.122974000000,4.107433182722,7.920000000000, !- X,Y,Z ==> Vertex 1 {m}
41.122974000000,-15.731187000000,7.920000000000, !- X,Y,Z ==> Vertex 2 {m}
41.122974000000,-5.811876908639,12.046992000000; !- X,Y,Z ==> Vertex 3 {m}
But the coordinate of ceiling_unit1_FrontRow_MiddleFloor is:ceiling_unit1_FrontRow_MiddleFloor
0.000000000000,0.000000000000,5.332900000000, !- X,Y,Z ==> Vertex 1 {m}
12.178962909315,0.000000000000,5.332900000000, !- X,Y,Z ==> Vertex 2 {m}
12.178962909315,9.157114969410,5.332900000000, !- X,Y,Z ==> Vertex 3 {m}
0.000000000000,9.157114969410,5.332900000000; !- X,Y,Z ==> Vertex 4 {m}
I think the coordinate of Roof_left
0.0,19.8386201827,5.332900000000, !- X,Y,Z ==> Vertex 1 {m}
0.0,0.0,5.332900000000, !- X,Y,Z ==> Vertex 2 {m}
0.0,9.91931009136,5.332900000000; !- X,Y,Z ==> Vertex 3 {m}
Why the Prototype Building Models have this kind of roof coordinate?
Change the geometry of building in idf file.
When I use the Multi-family Residential Prototype Building Models, I found that the coordinate of the roof is wired. For example, the coordinate of Roof_left is:
Why the Prototype Building Models have this kind of roof coordinate?