Hi all! I am writing to you to understand why the EMS routine I have implemented in the model doesn’t give output values. I've created all the sensors, then the actuators. In the program section I've added the routine and in the global variable I've put variables coming from the routine. In Output:variable I've created a variable with the schedule of the routine, but after that analysis ends in the excel file in the column of the schedule result are 0. The EMS code is the following:

!-   ===========  ALL OBJECTS IN CLASS: ENERGYMANAGEMENTSYSTEM:SENSOR ===========

EnergyManagementSystem:Sensor,
   Tout,                    !- Name
   Environment,             !- Output:Variable or Output:Meter Index Key Name
   Site Outdoor Air Drybulb Temperature;  !- Output:Variable or Output:Meter Name

EnergyManagementSystem:Sensor,
   RHout,                   !- Name
   Environment,             !- Output:Variable or Output:Meter Index Key Name
   Site Outdoor Air Relative Humidity;  !- Output:Variable or Output:Meter Name

EnergyManagementSystem:Sensor,
   WS,                      !- Name
   Environment,             !- Output:Variable or Output:Meter Index Key Name
   Site Wind Speed;         !- Output:Variable or Output:Meter Name

EnergyManagementSystem:Sensor,
   Rain,                    !- Name
   Environment,             !- Output:Variable or Output:Meter Index Key Name
   Site Rain Status;        !- Output:Variable or Output:Meter Name

EnergyManagementSystem:Sensor,
   Tin_KXS1,                !- Name
   PianoSecondo:KXS1,       !- Output:Variable or Output:Meter Index Key Name
   Zone Mean Air Temperature;  !- Output:Variable or Output:Meter Name

EnergyManagementSystem:Sensor,
   RHin_KXS1,               !- Name
   PianoSecondo:KXS1,       !- Output:Variable or Output:Meter Index Key Name
   Zone Air Relative Humidity;  !- Output:Variable or Output:Meter Name

EnergyManagementSystem:Sensor,
   OCC_KXS1,                !- Name
   PianoSecondo:KXS1,       !- Output:Variable or Output:Meter Index Key Name
   Zone People Occupant Count;  !- Output:Variable or Output:Meter Name

EnergyManagementSystem:Sensor,
   Tin_LM1,                 !- Name
   PianoSecondo:LM1,        !- Output:Variable or Output:Meter Index Key Name
   Zone Mean Air Temperature;  !- Output:Variable or Output:Meter Name

EnergyManagementSystem:Sensor,
    RHin_LM1,                !- Name
    PianoSecondo:LM1,        !- Output:Variable or Output:Meter Index Key Name
    Zone Air Relative Humidity;  !- Output:Variable or Output:Meter Name

EnergyManagementSystem:Sensor,
    OCC_LM1,                 !- Name
    PianoSecondo:LM1,        !- Output:Variable or Output:Meter Index Key Name
    Zone People Occupant Count;  !- Output:Variable or Output:Meter Name

EnergyManagementSystem:Sensor,
    Tin_LS1,                 !- Name
    PianoSecondo:LS1,        !- Output:Variable or Output:Meter Index Key Name
    Zone Mean Air Temperature;  !- Output:Variable or Output:Meter Name

EnergyManagementSystem:Sensor,
    RH_LS1,                  !- Name
    PianoSecondo:LS1,        !- Output:Variable or Output:Meter Index Key Name
    Zone Air Relative Humidity;  !- Output:Variable or Output:Meter Name

EnergyManagementSystem:Sensor,
    OCC_LS1,                 !- Name
    PianoSecondo:LS1,        !- Output:Variable or Output:Meter Index Key Name
    Zone People Occupant Count;  !- Output:Variable or Output:Meter Name


!-   ===========  ALL OBJECTS IN CLASS: ENERGYMANAGEMENTSYSTEM:ACTUATOR ===========

EnergyManagementSystem:Actuator,
    Window1_S1_act,          !- Name
    BLDG_KXS1_WINDOW1_Jones_2017_SCH,  !- Actuated Component Unique Name
    Schedule:Compact,        !- Actuated Component Type
    Schedule Value;          !- Actuated Component Control Type

EnergyManagementSystem:Actuator,
    Window2_S1_act,          !- Name
    BLDG_KXS1_WINDOW2_Jones_2017_SCH,  !- Actuated Component Unique Name
    Schedule:Compact,        !- Actuated Component Type
    Schedule Value;          !- Actuated Component Control Type

EnergyManagementSystem:Actuator,
    Window_LM1_act,          !- Name
    BLDG_LM1_WINDOW_Jones_2017_SCH,  !- Actuated Component Unique Name
    Schedule:Compact,        !- Actuated Component Type
    Schedule Value;          !- Actuated Component Control Type

EnergyManagementSystem:Actuator,
    Window_LS1_act,          !- Name
    BLDG_LS1_WINDOW_Jones_2017_SCH,  !- Actuated Component Unique Name
    Schedule:Compact,        !- Actuated Component Type
    Schedule Value;          !- Actuated Component Control Type

!-   ===========  ALL OBJECTS IN CLASS: ENERGYMANAGEMENTSYSTEM:PROGRAM ===========

EnergyManagementSystem:Program,
    Variable,                !- Name
    set A1=-9.275,           !- Program Line 1
    set A2=-2.984,           !- Program Line 2
    set B1=0.233,            !- A4
    set B2=0.038,            !- A5
    set B3=-0.105,           !- A6
    set B4=-0.042,           !- A7
    set B5=0-057,            !- A8
    set B6=0.034,            !- A9
    set B7=-0.178,           !- A10
    set B8=-0.017,           !- A11
    set B9=0.062,            !- A12
    set B10=0.063,           !- A13
    set B11=0.032;           !- A14

EnergyManagementSystem:Program,
    Window_Jones_2017,       !- Name
    set Wind_Cur_State=Window1_S1_act,  !- Program Line 1
    if Wind_Cur_State == 0,  !- Program Line 2
      if OCC_KXS1>0,           !- A4
        set handle=A1+B1*Tin_KXS1+B2*RHin_KXS1-B3*Tout-B4*RHout+B5*WS+B6*Rain,  !- A5
        set handle=@Exp handle,  !- A6
        set handle=handle/(handle+1),  !- A7
        set R=@RandomUniform 0 1,!- A8
        if handle>R,             !- A9
          set Window1_KXS1_act=1,  !- A10
        endif,                   !- A11
      else,                    !- A12
        set Window1_KXS1_act=0,  !- A13
      endif,                   !- A14
    endif,                   !- A15
    if Wind_Cur_State == 1,  !- A16
      if OCC_KXS1>0,           !- A17
        set handle=A2+B7*Tin_KXS1+B8*RHin_KXS1+B9*Tout+B10*WS+B11*Rain,  !- A18
        set handle=@Exp handle,  !- A19
        set handle=handle/(handle+1),  !- A20
        set R=@RandomUniform 0 1,!- A21
        if handle>R,             !- A22
          set Window1_KXS1_act=0,  !- A23
        endif,                   !- A24
      else,                    !- A25
        set Window1_KXS1_act=0,  !- A26
      endif,                   !- A27
    endif;                   !- A28

!-   ===========  ALL OBJECTS IN CLASS: OUTPUT:VARIABLE ===========

Output:Variable,
    SecondFloor:KXS1,       !- Key Value
    Zone Mean Air Temperature,  !- Variable Name
    Hourly;                  !- Reporting Frequency

Output:Variable,
    BLDG_KXS1_WINDOW1_Jones_2017_SCH,  !- Key Value
    Schedule Value,          !- Variable Name
    Hourly;                  !- Reporting Frequency

Output:Variable,
    SecondFloor:KXS1,       !- Key Value
    Zone Air Relative Humidity,  !- Variable Name
    Hourly;                  !- Reporting Frequency

Output:Variable,
    SecondFloor:KXS1,       !- Key Value
    Zone People Occupant Count,  !- Variable Name
    Hourly;                  !- Reporting Frequency

Output:Variable,
    Environment,             !- Key Value
    Site Outdoor Air Drybulb Temperature,  !- Variable Name
    Hourly;                  !- Reporting Frequency

Output:Variable,
    Environment,             !- Key Value
    Site Outdoor Air Relative Humidity,  !- Variable Name
    Hourly;                  !- Reporting Frequency

Output:Variable,
    Environment,             !- Key Value
    Site Wind Speed,         !- Variable Name
    Hourly;                  !- Reporting Frequency

Output:Variable,
    Environment,             !- Key Value
    Site Rain Status,        !- Variable Name
    Hourly;                  !- Reporting Frequency

Output:Variable,
    Occupancy KXS1_People,   !- Key Value
    Schedule Value,          !- Variable Name
    Hourly;                  !- Reporting Frequency

Output:Variable,
    PianoSecondo:KXS1,       !- Key Value
    Zone Operative Temperature,  !- Variable Name
    Hourly;                  !- Reporting Frequency

Hi all! I am writing to you to understand why the EMS routine I have implemented in the model doesn’t give output values. I've created all the sensors, then the actuators. In the program section I've added the routine and in the global variable I've put variables coming from the routine. In Output:variable I've created a variable with the schedule of the routine, but after that analysis ends in the excel file in the column of the schedule result are 0. The EMS code is the following:

!-   ===========  ALL OBJECTS IN CLASS: ENERGYMANAGEMENTSYSTEM:SENSOR ===========

EnergyManagementSystem:Sensor,
   Tout,                    !- Name
   Environment,             !- Output:Variable or Output:Meter Index Key Name
   Site Outdoor Air Drybulb Temperature;  !- Output:Variable or Output:Meter Name

EnergyManagementSystem:Sensor,
   RHout,                   !- Name
   Environment,             !- Output:Variable or Output:Meter Index Key Name
   Site Outdoor Air Relative Humidity;  !- Output:Variable or Output:Meter Name

EnergyManagementSystem:Sensor,
   WS,                      !- Name
   Environment,             !- Output:Variable or Output:Meter Index Key Name
   Site Wind Speed;         !- Output:Variable or Output:Meter Name

EnergyManagementSystem:Sensor,
   Rain,                    !- Name
   Environment,             !- Output:Variable or Output:Meter Index Key Name
   Site Rain Status;        !- Output:Variable or Output:Meter Name

EnergyManagementSystem:Sensor,
   Tin_KXS1,                !- Name
   PianoSecondo:KXS1,       !- Output:Variable or Output:Meter Index Key Name
   Zone Mean Air Temperature;  !- Output:Variable or Output:Meter Name

EnergyManagementSystem:Sensor,
   RHin_KXS1,               !- Name
   PianoSecondo:KXS1,       !- Output:Variable or Output:Meter Index Key Name
   Zone Air Relative Humidity;  !- Output:Variable or Output:Meter Name

EnergyManagementSystem:Sensor,
   OCC_KXS1,                !- Name
   PianoSecondo:KXS1,       !- Output:Variable or Output:Meter Index Key Name
   Zone People Occupant Count;  !- Output:Variable or Output:Meter Name

EnergyManagementSystem:Sensor,
   Tin_LM1,                 !- Name
   PianoSecondo:LM1,        !- Output:Variable or Output:Meter Index Key Name
   Zone Mean Air Temperature;  !- Output:Variable or Output:Meter Name

EnergyManagementSystem:Sensor,
    RHin_LM1,                !- Name
    PianoSecondo:LM1,        !- Output:Variable or Output:Meter Index Key Name
    Zone Air Relative Humidity;  !- Output:Variable or Output:Meter Name

EnergyManagementSystem:Sensor,
    OCC_LM1,                 !- Name
    PianoSecondo:LM1,        !- Output:Variable or Output:Meter Index Key Name
    Zone People Occupant Count;  !- Output:Variable or Output:Meter Name

EnergyManagementSystem:Sensor,
    Tin_LS1,                 !- Name
    PianoSecondo:LS1,        !- Output:Variable or Output:Meter Index Key Name
    Zone Mean Air Temperature;  !- Output:Variable or Output:Meter Name

EnergyManagementSystem:Sensor,
    RH_LS1,                  !- Name
    PianoSecondo:LS1,        !- Output:Variable or Output:Meter Index Key Name
    Zone Air Relative Humidity;  !- Output:Variable or Output:Meter Name

EnergyManagementSystem:Sensor,
    OCC_LS1,                 !- Name
    PianoSecondo:LS1,        !- Output:Variable or Output:Meter Index Key Name
    Zone People Occupant Count;  !- Output:Variable or Output:Meter Name


!-   ===========  ALL OBJECTS IN CLASS: ENERGYMANAGEMENTSYSTEM:ACTUATOR ===========

EnergyManagementSystem:Actuator,
    Window1_S1_act,          !- Name
    BLDG_KXS1_WINDOW1_Jones_2017_SCH,  !- Actuated Component Unique Name
    Schedule:Compact,        !- Actuated Component Type
    Schedule Value;          !- Actuated Component Control Type

EnergyManagementSystem:Actuator,
    Window2_S1_act,          !- Name
    BLDG_KXS1_WINDOW2_Jones_2017_SCH,  !- Actuated Component Unique Name
    Schedule:Compact,        !- Actuated Component Type
    Schedule Value;          !- Actuated Component Control Type

EnergyManagementSystem:Actuator,
    Window_LM1_act,          !- Name
    BLDG_LM1_WINDOW_Jones_2017_SCH,  !- Actuated Component Unique Name
    Schedule:Compact,        !- Actuated Component Type
    Schedule Value;          !- Actuated Component Control Type

EnergyManagementSystem:Actuator,
    Window_LS1_act,          !- Name
    BLDG_LS1_WINDOW_Jones_2017_SCH,  !- Actuated Component Unique Name
    Schedule:Compact,        !- Actuated Component Type
    Schedule Value;          !- Actuated Component Control Type

!-   ===========  ALL OBJECTS IN CLASS: ENERGYMANAGEMENTSYSTEM:PROGRAM ===========

EnergyManagementSystem:Program,
    Variable,                !- Name
    set A1=-9.275,           !- Program Line 1
    set A2=-2.984,           !- Program Line 2
    set B1=0.233,            !- A4
    set B2=0.038,            !- A5
    set B3=-0.105,           !- A6
    set B4=-0.042,           !- A7
    set B5=0-057,            !- A8
    set B6=0.034,            !- A9
    set B7=-0.178,           !- A10
    set B8=-0.017,           !- A11
    set B9=0.062,            !- A12
    set B10=0.063,           !- A13
    set B11=0.032;           !- A14

EnergyManagementSystem:Program,
    Window_Jones_2017,       !- Name
    set Wind_Cur_State=Window1_S1_act,  !- Program Line 1
    if Wind_Cur_State == 0,  !- Program Line 2
      if OCC_KXS1>0,           !- A4
        set handle=A1+B1*Tin_KXS1+B2*RHin_KXS1-B3*Tout-B4*RHout+B5*WS+B6*Rain,  !- A5
        set handle=@Exp handle,  !- A6
        set handle=handle/(handle+1),  !- A7
        set R=@RandomUniform 0 1,!- A8
        if handle>R,             !- A9
          set Window1_KXS1_act=1,  !- A10
        endif,                   !- A11
      else,                    !- A12
        set Window1_KXS1_act=0,  !- A13
      endif,                   !- A14
    endif,                   !- A15
    if Wind_Cur_State == 1,  !- A16
      if OCC_KXS1>0,           !- A17
        set handle=A2+B7*Tin_KXS1+B8*RHin_KXS1+B9*Tout+B10*WS+B11*Rain,  !- A18
        set handle=@Exp handle,  !- A19
        set handle=handle/(handle+1),  !- A20
        set R=@RandomUniform 0 1,!- A21
        if handle>R,             !- A22
          set Window1_KXS1_act=0,  !- A23
        endif,                   !- A24
      else,                    !- A25
        set Window1_KXS1_act=0,  !- A26
      endif,                   !- A27
    endif;                   !- A28

!-   ===========  ALL OBJECTS IN CLASS: OUTPUT:VARIABLE ===========

Output:Variable,
    SecondFloor:KXS1,       !- Key Value
    Zone Mean Air Temperature,  !- Variable Name
    Hourly;                  !- Reporting Frequency

Output:Variable,
    BLDG_KXS1_WINDOW1_Jones_2017_SCH,  !- Key Value
    Schedule Value,          !- Variable Name
    Hourly;                  !- Reporting Frequency

Output:Variable,
    SecondFloor:KXS1,       !- Key Value
    Zone Air Relative Humidity,  !- Variable Name
    Hourly;                  !- Reporting Frequency

Output:Variable,
    SecondFloor:KXS1,       !- Key Value
    Zone People Occupant Count,  !- Variable Name
    Hourly;                  !- Reporting Frequency

Output:Variable,
    Environment,             !- Key Value
    Site Outdoor Air Drybulb Temperature,  !- Variable Name
    Hourly;                  !- Reporting Frequency

Output:Variable,
    Environment,             !- Key Value
    Site Outdoor Air Relative Humidity,  !- Variable Name
    Hourly;                  !- Reporting Frequency

Output:Variable,
    Environment,             !- Key Value
    Site Wind Speed,         !- Variable Name
    Hourly;                  !- Reporting Frequency

Output:Variable,
    Environment,             !- Key Value
    Site Rain Status,        !- Variable Name
    Hourly;                  !- Reporting Frequency

Output:Variable,
    Occupancy KXS1_People,   !- Key Value
    Schedule Value,          !- Variable Name
    Hourly;                  !- Reporting Frequency

Output:Variable,
    PianoSecondo:KXS1,       !- Key Value
    Zone Operative Temperature,  !- Variable Name
    Hourly;                  !- Reporting Frequency

Hi all! I am writing to you to understand why the EMS routine I have implemented in the model doesn’t give output values. I've created all the sensors, then the actuators. In the program section I've added the routine and in the global variable I've put variables coming from the routine. In Output:variable I've created a variable with the schedule of the routine, but after that analysis ends in the excel file in the column of the schedule result are 0. The EMS code is the following:

!-   ===========  ALL OBJECTS IN CLASS: ENERGYMANAGEMENTSYSTEM:PROGRAM ===========

EnergyManagementSystem:Program,
    Variable,                !- Name
    set A1=-9.275,           !- Program Line 1
    set A2=-2.984,           !- Program Line 2
    set B1=0.233,            !- A4
    set B2=0.038,            !- A5
    set B3=-0.105,           !- A6
    set B4=-0.042,           !- A7
    set B5=0-057,            !- A8
    set B6=0.034,            !- A9
    set B7=-0.178,           !- A10
    set B8=-0.017,           !- A11
    set B9=0.062,            !- A12
    set B10=0.063,           !- A13
    set B11=0.032;           !- A14

EnergyManagementSystem:Program,
    Window_Jones_2017,       !- Name
    set Wind_Cur_State=Window1_S1_act,  !- Program Line 1
    if Wind_Cur_State == 0,  !- Program Line 2
     if OCC_KXS1>0,           !- A4
     set handle=A1+B1*Tin_KXS1+B2*RHin_KXS1-B3*Tout-B4*RHout+B5*WS+B6*Rain,  !- A5
     set handle=@Exp handle,  !- A6
     set handle=handle/(handle+1),  !- A7
     set R=@RandomUniform 0 1,!- A8
     if handle>R,             !- A9
     set Window1_KXS1_act=1,  !- A10
     endif,                   !- A11
     else,                    !- A12
     set Window1_KXS1_act=0,  !- A13
     endif,                   !- A14
    endif,                   !- A15
    if Wind_Cur_State == 1,  !- A16
     if OCC_KXS1>0,           !- A17
     set handle=A2+B7*Tin_KXS1+B8*RHin_KXS1+B9*Tout+B10*WS+B11*Rain,  !- A18
     set handle=@Exp handle,  !- A19
     set handle=handle/(handle+1),  !- A20
     set R=@RandomUniform 0 1,!- A21
     if handle>R,             !- A22
     set Window1_KXS1_act=0,  !- A23
     endif,                   !- A24
     else,                    !- A25
     set Window1_KXS1_act=0,  !- A26
     endif,                   !- A27
    endif;                   !- A28

!-   ===========  ALL OBJECTS IN CLASS: OUTPUT:VARIABLE ===========

Output:Variable,
    SecondFloor:KXS1,       !- Key Value
    Zone Mean Air Temperature,  !- Variable Name
    Hourly;                  !- Reporting Frequency

Output:Variable,
    BLDG_KXS1_WINDOW1_Jones_2017_SCH,  !- Key Value
    Schedule Value,          !- Variable Name
    Hourly;                  !- Reporting Frequency

Output:Variable,
    SecondFloor:KXS1,       !- Key Value
    Zone Air Relative Humidity,  !- Variable Name
    Hourly;                  !- Reporting Frequency

Output:Variable,
    SecondFloor:KXS1,       !- Key Value
    Zone People Occupant Count,  !- Variable Name
    Hourly;                  !- Reporting Frequency

Output:Variable,
    Environment,             !- Key Value
    Site Outdoor Air Drybulb Temperature,  !- Variable Name
    Hourly;                  !- Reporting Frequency

Output:Variable,
    Environment,             !- Key Value
    Site Outdoor Air Relative Humidity,  !- Variable Name
    Hourly;                  !- Reporting Frequency

Output:Variable,
    Environment,             !- Key Value
    Site Wind Speed,         !- Variable Name
    Hourly;                  !- Reporting Frequency

Output:Variable,
    Environment,             !- Key Value
    Site Rain Status,        !- Variable Name
    Hourly;                  !- Reporting Frequency

Output:Variable,
    Occupancy KXS1_People,   !- Key Value
    Schedule Value,          !- Variable Name
    Hourly;                  !- Reporting Frequency

Output:Variable,
    PianoSecondo:KXS1,       !- Key Value
    Zone Operative Temperature,  !- Variable Name
    Hourly;                  !- Reporting Frequency

Hi all! I am writing to you to understand why the EMS routine I have implemented in the model doesn’t give output values. I've created all the sensors, then the actuators. In the program section I've added the routine and in the global variable I've put variables coming from the routine. In Output:variable I've created a variable with the schedule of the routine, but after that analysis ends in the excel file in the column of the schedule result are 0. The EMS code is the following:

!-   ===========  ALL OBJECTS IN CLASS: ENERGYMANAGEMENTSYSTEM:PROGRAM ===========

===========
 
EnergyManagementSystem:Program,
    Variable,                !- Name
    set A1=-9.275,           !- Program Line 1
    set A2=-2.984,           !- Program Line 2
    set B1=0.233,            !- A4
    set B2=0.038,            !- A5
    set B3=-0.105,           !- A6
    set B4=-0.042,           !- A7
    set B5=0-057,            !- A8
    set B6=0.034,            !- A9
    set B7=-0.178,           !- A10
    set B8=-0.017,           !- A11
    set B9=0.062,            !- A12
    set B10=0.063,           !- A13
    set B11=0.032;           !- A14

A14
 
EnergyManagementSystem:Program,
    Window_Jones_2017,       !- Name
    set Wind_Cur_State=Window1_S1_act,  !- Program Line 1
    if Wind_Cur_State == 0,  !- Program Line 2
    if OCC_KXS1>0,           !- A4
    set handle=A1+B1*Tin_KXS1+B2*RHin_KXS1-B3*Tout-B4*RHout+B5*WS+B6*Rain, handle=A1+B1Tin_KXS1+B2RHin_KXS1-B3Tout-B4RHout+B5WS+B6Rain,  !- A5
    set handle=@Exp handle,  !- A6
    set handle=handle/(handle+1),  !- A7
    set R=@RandomUniform 0 1,!- A8
    if handle>R,             !- A9
    set Window1_KXS1_act=1,  !- A10
    endif,                   !- A11
    else,                    !- A12
    set Window1_KXS1_act=0,  !- A13
    endif,                   !- A14
    endif,                   !- A15
    if Wind_Cur_State == 1,  !- A16
    if OCC_KXS1>0,           !- A17
    set handle=A2+B7*Tin_KXS1+B8*RHin_KXS1+B9*Tout+B10*WS+B11*Rain, handle=A2+B7Tin_KXS1+B8RHin_KXS1+B9Tout+B10WS+B11*Rain,  !- A18
    set handle=@Exp handle,  !- A19
    set handle=handle/(handle+1),  !- A20
    set R=@RandomUniform 0 1,!- A21
    if handle>R,             !- A22
    set Window1_KXS1_act=0,  !- A23
    endif,                   !- A24
    else,                    !- A25
    set Window1_KXS1_act=0,  !- A26
    endif,                   !- A27
    endif;                   !- A28

A28
 
!-   ===========  ALL OBJECTS IN CLASS: OUTPUT:VARIABLE ===========

===========
 
Output:Variable,
    SecondFloor:KXS1,       !- Key Value
    Zone Mean Air Temperature,  !- Variable Name
    Hourly;                  !- Reporting Frequency

Frequency
 
Output:Variable,
    BLDG_KXS1_WINDOW1_Jones_2017_SCH,  !- Key Value
    Schedule Value,          !- Variable Name
    Hourly;                  !- Reporting Frequency

Frequency
 
Output:Variable,
    SecondFloor:KXS1,       !- Key Value
    Zone Air Relative Humidity,  !- Variable Name
    Hourly;                  !- Reporting Frequency

Frequency
 
Output:Variable,
    SecondFloor:KXS1,       !- Key Value
    Zone People Occupant Count,  !- Variable Name
    Hourly;                  !- Reporting Frequency

Frequency
 
Output:Variable,
    Environment,             !- Key Value
    Site Outdoor Air Drybulb Temperature,  !- Variable Name
    Hourly;                  !- Reporting Frequency

Frequency
 
Output:Variable,
    Environment,             !- Key Value
    Site Outdoor Air Relative Humidity,  !- Variable Name
    Hourly;                  !- Reporting Frequency

Frequency
 
Output:Variable,
    Environment,             !- Key Value
    Site Wind Speed,         !- Variable Name
    Hourly;                  !- Reporting Frequency

Frequency
 
Output:Variable,
    Environment,             !- Key Value
    Site Rain Status,        !- Variable Name
    Hourly;                  !- Reporting Frequency

Frequency
 
Output:Variable,
    Occupancy KXS1_People,   !- Key Value
    Schedule Value,          !- Variable Name
    Hourly;                  !- Reporting Frequency

Frequency
 
Output:Variable,
    PianoSecondo:KXS1,       !- Key Value
    Zone Operative Temperature,  !- Variable Name
    Hourly;                  !- Reporting Frequency

Hi all! I am writing to you to understand why the EMS routine I have implemented in the model doesn’t give output values. I've created all the sensors, then the actuators. In the program section I've added the routine and in the global variable I've put variables coming from the routine. In Output:variable I've created a variable with the schedule of the routine, but after that analysis ends in the excel file in the column of the schedule result are 0. The EMS code is the following:

!- =========== ALL OBJECTS IN CLASS: ENERGYMANAGEMENTSYSTEM:PROGRAM ===========

EnergyManagementSystem:Program, Variable, !- Name set A1=-9.275, !- Program Line 1 set A2=-2.984, !- Program Line 2 set B1=0.233, !- A4 set B2=0.038, !- A5 set B3=-0.105, !- A6 set B4=-0.042, !- A7 set B5=0-057, !- A8 set B6=0.034, !- A9 set B7=-0.178, !- A10 set B8=-0.017, !- A11 set B9=0.062, !- A12 set B10=0.063, !- A13 set B11=0.032; !- A14

EnergyManagementSystem:Program, Window_Jones_2017, !- Name set Wind_Cur_State=Window1_S1_act, !- Program Line 1 if Wind_Cur_State == 0, !- Program Line 2 if OCC_KXS1>0, !- A4 set handle=A1+B1Tin_KXS1+B2RHin_KXS1-B3Tout-B4RHout+B5WS+B6Rain, !- A5 set handle=@Exp handle, !- A6 set handle=handle/(handle+1), !- A7 set R=@RandomUniform 0 1,!- A8 if handle>R, !- A9 set Window1_KXS1_act=1, !- A10 endif, !- A11 else, !- A12 set Window1_KXS1_act=0, !- A13 endif, !- A14 endif, !- A15 if Wind_Cur_State == 1, !- A16 if OCC_KXS1>0, !- A17 set handle=A2+B7Tin_KXS1+B8RHin_KXS1+B9Tout+B10WS+B11*Rain, !- A18 set handle=@Exp handle, !- A19 set handle=handle/(handle+1), !- A20 set R=@RandomUniform 0 1,!- A21 if handle>R, !- A22 set Window1_KXS1_act=0, !- A23 endif, !- A24 else, !- A25 set Window1_KXS1_act=0, !- A26 endif, !- A27 endif; !- A28

!- =========== ALL OBJECTS IN CLASS: OUTPUT:VARIABLE ===========

Output:Variable, SecondFloor:KXS1, !- Key Value Zone Mean Air Temperature, !- Variable Name Hourly; !- Reporting Frequency

Output:Variable, BLDG_KXS1_WINDOW1_Jones_2017_SCH, !- Key Value Schedule Value, !- Variable Name Hourly; !- Reporting Frequency

Output:Variable, SecondFloor:KXS1, !- Key Value Zone Air Relative Humidity, !- Variable Name Hourly; !- Reporting Frequency

Output:Variable, SecondFloor:KXS1, !- Key Value Zone People Occupant Count, !- Variable Name Hourly; !- Reporting Frequency

Output:Variable, Environment, !- Key Value Site Outdoor Air Drybulb Temperature, !- Variable Name Hourly; !- Reporting Frequency

Output:Variable, Environment, !- Key Value Site Outdoor Air Relative Humidity, !- Variable Name Hourly; !- Reporting Frequency

Output:Variable, Environment, !- Key Value Site Wind Speed, !- Variable Name Hourly; !- Reporting Frequency

Output:Variable, Environment, !- Key Value Site Rain Status, !- Variable Name Hourly; !- Reporting Frequency

Output:Variable, Occupancy KXS1_People, !- Key Value Schedule Value, !- Variable Name Hourly; !- Reporting Frequency

Output:Variable, PianoSecondo:KXS1, !- Key Value Zone Operative Temperature, !- Variable Name Hourly; !- Reporting Frequency0.

Hi all! I am writing to you to understand why the EMS routine I have implemented in the model doesn’t give output values. I've created all the sensors, then the actuators. In the program section I've added the routine and in the global variable I've put variables coming from the routine. In Output:variable I've created a variable with the schedule of the routine, but after that analysis ends in the excel file in the column of the schedule result are 0.