I get the following warning:

The following Report Variables were requested but not generated -- check.rdd file
**   ~~~   ** Either the IDF did not contain these elements, the variable name is misspelled,
**   ~~~   ** or the requested variable is an advanced output which requires Output:Diagnostics, DisplayAdvancedReportVariables;   
************* Key=*, VarName=ELECTRIC STORAGE DEGRADATION FRACTION, Frequency=TimeStep
************* Key=*, VarName=ELECTRIC STORAGE CHARGE FRACTION, Frequency=TimeStep   
************* Key=*, VarName=ELECTRIC STORAGE OPERATING MODE INDEX, Frequency=TimeStep
************* Key=*, VarName=ELECTRIC STORAGE BATTERY CHARGE STATE, Frequency=TimeStep
************* Key=*, VarName=ELECTRIC STORAGE CHARGE POWER, Frequency=TimeStep   
************* Key=*, VarName=ELECTRIC STORAGE CHARGE ENERGY, Frequency=TimeStep
************* Key=*, VarName=ELECTRIC STORAGE DISCHARGE POWER, Frequency=TimeStep   
************* Key=*, VarName=ELECTRIC STORAGE DISCHARGE ENERGY, Frequency=TimeStep
************* Key=*, VarName=ELECTRIC STORAGE THERMAL LOSS ENERGY, Frequency=TimeStep

I have defined a battery (as in the picture below) and compared with the example file ShopWithPVandBattery.idf. I wonder why I can not access these Outputs defined under "ElectricLoadCenter:Storage:Battery" in InputOutputReference

I get the following warning:

The following Report Variables were requested but not generated -- check.rdd file
**   ~~~   ** Either the IDF did not contain these elements, the variable name is misspelled,
**   ~~~   ** or the requested variable is an advanced output which requires Output:Diagnostics, DisplayAdvancedReportVariables;   
************* Key=*, VarName=ELECTRIC STORAGE DEGRADATION FRACTION, Frequency=TimeStep
************* Key=*, VarName=ELECTRIC STORAGE CHARGE FRACTION, Frequency=TimeStep   
************* Key=*, VarName=ELECTRIC STORAGE OPERATING MODE INDEX, Frequency=TimeStep
************* Key=*, VarName=ELECTRIC STORAGE BATTERY CHARGE STATE, Frequency=TimeStep
************* Key=*, VarName=ELECTRIC STORAGE CHARGE POWER, Frequency=TimeStep   
************* Key=*, VarName=ELECTRIC STORAGE CHARGE ENERGY, Frequency=TimeStep
************* Key=*, VarName=ELECTRIC STORAGE DISCHARGE POWER, Frequency=TimeStep   
************* Key=*, VarName=ELECTRIC STORAGE DISCHARGE ENERGY, Frequency=TimeStep
************* Key=*, VarName=ELECTRIC STORAGE THERMAL LOSS ENERGY, Frequency=TimeStep

I have defined a battery (as in the picture below) and compared with the example file ShopWithPVandBattery.idf. I wonder why I can not access these Outputs defined under "ElectricLoadCenter:Storage:Battery" in InputOutputReference

I get the following warning:

The following Report Variables were requested but not generated -- check.rdd file
**   ~~~   ** Either the IDF did not contain these elements, the variable name is misspelled,
**   ~~~   ** or the requested variable is an advanced output which requires Output:Diagnostics, DisplayAdvancedReportVariables;   
************* Key=*, VarName=ELECTRIC STORAGE DEGRADATION FRACTION, Frequency=TimeStep
************* Key=*, VarName=ELECTRIC STORAGE CHARGE FRACTION, Frequency=TimeStep   
************* Key=*, VarName=ELECTRIC STORAGE OPERATING MODE INDEX, Frequency=TimeStep
************* Key=*, VarName=ELECTRIC STORAGE BATTERY CHARGE STATE, Frequency=TimeStep
************* Key=*, VarName=ELECTRIC STORAGE CHARGE POWER, Frequency=TimeStep   
************* Key=*, VarName=ELECTRIC STORAGE CHARGE ENERGY, Frequency=TimeStep
************* Key=*, VarName=ELECTRIC STORAGE DISCHARGE POWER, Frequency=TimeStep   
************* Key=*, VarName=ELECTRIC STORAGE DISCHARGE ENERGY, Frequency=TimeStep
************* Key=*, VarName=ELECTRIC STORAGE THERMAL LOSS ENERGY, Frequency=TimeStep

I have defined a battery (as in the picture below) and compared with the example file ShopWithPVandBattery.idf. I wonder why I can not access these Outputs defined under "ElectricLoadCenter:Storage:Battery" in InputOutputReference

I get the following warning:

 
The following Report Variables were were
  requested but not generated -- --
  check.rdd file
** file    *   ~~~   ** Either * Either
  the IDF did not contain these these
  elements, the variable name is misspelled,
** is
  misspelled,    *   ~~~   ** * or the the
  requested variable is an advanced advanced
  output which requires Output:Diagnostics, Output :
  Diagnostics,
  DisplayAdvancedReportVariables;   
************* Key=*, 
 *** Key=, VarName=ELECTRIC STORAGE DEGRADATION FRACTION,
  Frequency=TimeStep    ***
  Key=, VarName=ELECTRIC STORAGE CHARGE
  FRACTION, Frequency=TimeStep
************* Key=*, VarName=ELECTRIC STORAGE CHARGE FRACTION, Frequency=TimeStep   
************* Key=*, Frequency=TimeStep 
 *** Key=, VarName=ELECTRIC STORAGE OPERATING MODE INDEX, Frequency=TimeStep
************* Key=*, VarName=ELECTRIC STORAGE INDEX,
  Frequency=TimeStep    ***
  Key=, VarName=ELECTRIC STORAGE
  BATTERY CHARGE STATE, Frequency=TimeStep
************* Key=*, STATE,
  Frequency=TimeStep    ***
  Key=, VarName=ELECTRIC STORAGE CHARGE
  POWER, Frequency=TimeStep 
 *** Key=, VarName=ELECTRIC STORAGE CHARGE POWER, Frequency=TimeStep   
************* Key=*, VarName=ELECTRIC STORAGE CHARGE ENERGY, Frequency=TimeStep
************* Key=*, VarName=ELECTRIC STORAGE ENERGY,
  Frequency=TimeStep    ***
  Key=, VarName=ELECTRIC STORAGE
  DISCHARGE POWER, Frequency=TimeStep   
************* Key=*, 
 *** Key=, VarName=ELECTRIC STORAGE DISCHARGE ENERGY, ENERGY,
  Frequency=TimeStep
*************  *** Key=*, VarName=ELECTRIC STORAGE THERMAL LOSS ENERGY, Frequency=TimeStep

I have defined a battery (as in the picture below) and compared with the example file ShopWithPVandBattery.idf. I wonder why I can not access these Outputs defined under "ElectricLoadCenter:Storage:Battery" in InputOutputReference