Revision history [back]
When I autosize the coil capacity in EP the nominal capacity is determined as 3656 KW.However, when I try to hard size the coil and reduce the capacity to 1872 KW, the temperature in the zone does not increase!
- The flow rate in both the cases is 99.1 m3/s.
When I autosize the coil capacity in EP the nominal capacity is determined as 3656 KW.However, when I try to hard size the coil and reduce the capacity to 1872 KW, the temperature in the zone does not increase!
- The flow rate in both the cases is 99.1 m3/s.
When I autosize the coil capacity in EP the nominal capacity is determined as 3656 KW.However, when I try to hard size the coil and reduce the capacity to 1872 KW, the temperature in the zone does not increase!
- The flow rate in both the cases is 99.1 m3/s.
I am trying to model a single zone with a single speed DX coil and a constant volume fan in EP. When I autosize the coil capacity in EP the nominal capacity is determined as 3656 KW.However, KW.
- **However, when I try to hard size the coil and reduce the capacity
toto 1872 KW, the temperature in thezonezone does notincrease!increase
I am trying to model a single zone with a single speed DX coil and a constant volume fan in EP. When I autosize the coil capacity the nominal capacity is determined as 3656 KW.
- **However, when I try to hard size the coil and reduce the capacity to 1872 KW, the temperature in the zone does not increase
.**
- The flow rate in both the cases is 99.1 m3/s.