Hello all,

I’m simulating a datacenter and the simulation shows a high cooling load. The internal equipment load is 276,3 Kw from racks and the cooling load is 362,97 Kw. Why this happen? How can I find this extra load? The Simulation has a measure that shows all loads from a zone. (Second image)

About the model:

Construction External wall: All external wall is adiabatic - no Sun and no Wind

Internal Loads People: zero

Infiltration: zero

Outdoor Air: zero

Equipment: 276,3 Kw (total)

Equipment Schedule (fraction): 1

Light: 11.84 W/m² Office_IT_Room Lights

Setpoint:

Datahall: 27C

Central Cooling Design Supply Air Temperature: 14C

File - https://drive.google.com/open?id=1IHe1KG-_1c02r-EbczCLOLpM6jc2K5yQ

Thank's!

(/upfiles/15198405231969875.png)

Hello all,

I’m simulating a datacenter and the simulation shows a high cooling load. The internal equipment load is 276,3 Kw from racks and the cooling load is 362,97 Kw. Why this happen? How can I find this extra load? The Simulation has a measure that shows all loads from a zone. (Second image)

About the model:

Construction External wall: All external wall is adiabatic - no Sun and no Wind

Internal Loads People: zero

zero Infiltration: zero

zero Outdoor Air: zero

zero Equipment: 276,3 Kw (total)

(total) Equipment Schedule (fraction): 1

Light: 11.84 W/m² Office_IT_Room Lights

Setpoint:

Setpoint: Datahall: 27C

27C Central Cooling Design Supply Air Temperature: 14C

Thank's!

(/upfiles/15198405231969875.png)

Hello all,

I’m simulating a datacenter and the simulation shows a high cooling load. The internal equipment load is 276,3 Kw from racks and the cooling load is 362,97 Kw. Why this happen? How can I find this extra load? The Simulation has a measure that shows all loads from a zone. (Second image)

About the model:

Construction External wall: All external wall is adiabatic - no Sun and no Wind

Internal Loads People: zero Infiltration: zero Outdoor Air: zero Equipment: 276,3 Kw (total) Equipment Schedule (fraction): 1

Light: 11.84 W/m² Office_IT_Room Lightswind

Setpoint: Datahall: 27C 27C

Central Cooling Design Supply Air Temperature: 14C

Equipment Schedule (fraction): 1

Thank's!

(/upfiles/15198405231969875.png)

Hello all,

I’m simulating a datacenter and the simulation shows a high cooling load. The internal equipment load is 276,3 Kw from racks and the cooling load is 362,97 Kw. Why this happen? How can I find this extra load? The Simulation has a measure that shows all loads from a zone. (Second image)

About the model:

External wall: All external wall is adiabatic - no Sun and no wind

Setpoint: Datahall: 27C

Central Cooling Design Supply Air Temperature: 14C

Equipment Schedule (fraction): 1

Thank's!

(/upfiles/15198405231969875.png)

Hello all,

I’m simulating a datacenter and the simulation shows a high cooling load. The internal equipment load is 276,3 Kw from racks and the cooling load is 362,97 Kw. Why this happen? How can I find this extra load? The Simulation has a measure that shows all loads from a zone. (Second image)

About the model:

External wall: All external wall is adiabatic - no Sun and no wind

wind Setpoint: Datahall: 27C

27C Central Cooling Design Supply Air Temperature: 14C

14C Equipment Schedule (fraction): 1

Thank's!

(/upfiles/15198405231969875.png)

Hello all,

I’m simulating a datacenter and the simulation shows a high cooling load. The internal equipment load is 276,3 Kw from racks and the cooling load is 362,97 Kw. Why this happen? How can I find this extra load? The Simulation has a measure that shows all loads from a zone. (Second image)

About the model:

External wall: All external wall is adiabatic - no Sun and no wind Setpoint: Datahall: 27C Central Cooling Design Supply Air Temperature: 14C Equipment Schedule (fraction): 1

Thank's!

(/upfiles/15198405231969875.png)

Hello all,

I’m simulating a datacenter and the simulation shows a high cooling load. The internal equipment load is 276,3 Kw from racks and the cooling load is 362,97 Kw. Why this happen? How can I find this extra load? The Simulation has I Simulated with a measure that shows all loads from a zone. (Second image)

About the model:

External wall: All external wall is adiabatic - no Sun and no wind Setpoint: Datahall: 27C Central Cooling Design Supply Air Temperature: 14C Equipment Schedule (fraction): 1zone.

Thank's!

(/upfiles/15198405231969875.png)

Hello all,

I’m simulating a datacenter and the simulation shows a high cooling load. The internal load is 276,3 Kw from racks and the cooling load is 362,97 Kw. Why this happen? How can I find this extra load? I Simulated with a measure that shows all loads from a zone.zone.

Thank's!

(/upfiles/15198405231969875.png)

Hello all,

I’m simulating a datacenter and the simulation shows a high cooling load. The internal load is 276,3 Kw from racks and the cooling load is 362,97 Kw. Why this happen? How can I find this extra load? I Simulated with a measure that shows all loads from a zone.

Thank's!

(/upfiles/15198405231969875.png)

Hello all,

I’m simulating a datacenter and the simulation shows a high cooling load. The internal load is 276,3 Kw from racks and the cooling load is 362,97 Kw. Why this happen? How can I find this extra load? I Simulated with a measure that shows all loads from a zone.

Thank's!

(/upfiles/15198405231969875.png)