Revision history [back]

Revision 4

updated 2016-09-18 13:10:55 -0500

Why is my DOE 2.1e parametric setup not updating on the second run?

I'm trying to setup parametric for air change value as follows:

INPUT LOADS  ..   
PARAMETER PAIR = 0.2 ..   
....   
AIR-CHANGES/HR       =PAIR TIMES 2.0  
END ..  
COMPUTE LOADS ..  
COMPUTE SYSTEMS ..  
COMPUTE PLANT ..  
PARAMETRIC-INPUT FOR LOADS ..  
PARAMETER AIR-CHANGES/HR    =1.0 
END ..   
COMPUTE LOADS ..    
COMPUTE SYSTEMS ..  
COMPUTE PLANT ..   
STOP ..

It runs two times but the second run is not updated with new air-change/hr value. What's wrong with my syntax?
Have any script/program to automatically export doe 2.1e report to BEPS ?

Revision 3

5.1k

Jamie Bull

updated 2016-09-17 04:36:38 -0500

Why is my DOE 2.1e [doe 2.1e] parametric setup not updating on the second run?setup

I'm trying to setup parametric for air change value as follows:

INPUT LOADS  ..   
PARAMETER PAIR = 0.2 ..   
....   
AIR-CHANGES/HR       =PAIR TIMES 2.0  
END ..  
COMPUTE LOADS ..  
COMPUTE SYSTEMS ..  
COMPUTE PLANT ..  
PARAMETRIC-INPUT FOR LOADS ..  
PARAMETER AIR-CHANGES/HR    =1.0 
END ..   
COMPUTE LOADS ..    
COMPUTE SYSTEMS ..  
COMPUTE PLANT ..   
STOP ..

It runs two times but the second run is not updated with new air-change/hr value. What's wrong with my syntax?
Have any script/program to automatically export doe 2.1e report to BEPS ?syntax?

Revision 2

2.2k

ngkhanh

updated 2016-09-17 00:17:15 -0500

[doe 2.1e] parametric setup

~~I'm trying~~ i try to setup parametric for air change value as ~~follows:~~follow:

INPUT LOADS .. PARAMETER PAIR = 0.2 .. .... AIR-CHANGES/HR =PAIR TIMES 2.0 END .. COMPUTE LOADS .. COMPUTE SYSTEMS .. COMPUTE PLANT .. PARAMETRIC-INPUT FOR LOADS .. PARAMETER AIR-CHANGES/HR =1.0 END .. COMPUTE LOADS .. COMPUTE SYSTEMS .. COMPUTE PLANT .. STOP ..
..

It runs ~~two~~ 2 times but the second ~~run~~ is not updated with new air-change/hr value. ~~What's~~ what's wrong ~~with~~ inside my ~~syntax?~~syntax ? Thanks

Revision 1

2.2k

ngkhanh

asked 2016-09-17 00:12:51 -0500

[doe 2.1e] parametric setup

i try to setup parametric for air change value as follow:

INPUT LOADS ..
.. PARAMETER PAIR = 0.2 ..
....
.. .... AIR-CHANGES/HR =PAIR TIMES 2.0
END ..
.. COMPUTE LOADS ..
COMPUTE SYSTEMS ..
COMPUTE PLANT ..
.. PARAMETRIC-INPUT FOR LOADS ..
PARAMETER .. PARAMETER AIR-CHANGES/HR =1.0 .. END ..
.. COMPUTE LOADS ..
COMPUTE SYSTEMS ..
COMPUTE PLANT ..
.. STOP ..

It runs 2 times but the second is not ~~updated with~~ meet new air-change/hr value. what's wrong inside my ~~syntax ?~~ syntax. Thanks