I am getting the following warnings, and I wanted to know the significance of these. I picked Cooling coil water and Chiller:Electric: EIR based on an example idf file.

Error files include:

** Warning ** In calculating the design coil UA for Coil:Cooling:Water COIL COOLING WATER 1
**   ~~~   ** no apparatus dew-point can be found for the initial entering and leaving conditions;
**   ~~~   ** the coil outlet design conditions will be changed to correct the problem.
**   ~~~   ** The initial design conditions are: Tair,in = 25.9241
**   ~~~   **                                    Wair,in = 1.816273E-002
**   ~~~   **                                    Twater,in = 7.5000
**   ~~~   **                                    Tair,out = 12.8000
**   ~~~   **                                    Wair,out = 8.281818E-003
**   ~~~   ** The revised design conditions are: Tair,out = 12.7997
**   ~~~   **                                    Wair,out = 8.281922E-003
** Warning ** Chiller:Electric:EIR = CHILLER ELECTRIC EIR 1:  Integrated Part Load Value (IPLV) calculated is not at the AHRI test condition.
**   ~~~   **  Check limits in Cooling Capacity Function of Temperature Curve, Curve Type = BIQUADRATIC, Curve Name = CURVE BIQUADRATIC 1
**   ~~~   **  Check limits in EIR Function of Temperature Curve, Curve Type = BIQUADRATIC, Curve Name = CURVE BIQUADRATIC 2
** Warning ** SetpointManager:Scheduled="SETPOINT MANAGER SCHEDULED 1"
**   ~~~   ** ...setpoint node conflicts with another setpoint manager.
**   ~~~   ** ...conflicting setpoint manager = SetpointManager:OutdoorAirReset:"AHU1 OUTLET SETPOINT"
**   ~~~   ** ...conflicting node name = AIR OUTLET NODE1
**   ~~~   ** ...control type variable = Temperature

I am getting the following warnings, and I wanted to know the significance of these. I picked Cooling coil water and nad Chiller:Electric: EIR based on an example idf file.file. Error files include:-

Error files include:

** * Warning ** * In calculating the design coil UA for Coil:Cooling:Water COIL COOLING WATER 1
**   ~~~   **  *   ~~~   * no apparatus dew-point can be found for the initial entering and leaving conditions;
**   ~~~   **  *   ~~~   * the coil outlet design conditions will be changed to correct the problem.
**   ~~~   **  *   ~~~   * The initial design conditions are: Tair,in = 25.9241
**   ~~~   **  *   ~~~   *                                    Wair,in = 1.816273E-002
**   ~~~   **  *   ~~~   *                                    Twater,in = 7.5000
**   ~~~   **  *   ~~~   *                                    Tair,out = 12.8000
**   ~~~   **  *   ~~~   *                                    Wair,out = 8.281818E-003
**   ~~~   **  *   ~~~   * The revised design conditions are: Tair,out = 12.7997
**   ~~~   **  *   ~~~   *                                    Wair,out = 8.281922E-003
**  * Warning ** * Chiller:Electric:EIR = CHILLER ELECTRIC EIR 1:  Integrated Part Load Value (IPLV) calculated is not at the AHRI test condition.
**   ~~~   **  *   ~~~   *  Check limits in Cooling Capacity Function of Temperature Curve, Curve Type = BIQUADRATIC, Curve Name = CURVE BIQUADRATIC 1
**   ~~~   **  *   ~~~   *  Check limits in EIR Function of Temperature Curve, Curve Type = BIQUADRATIC, Curve Name = CURVE BIQUADRATIC 2
**  * Warning ** * SetpointManager:Scheduled="SETPOINT MANAGER SCHEDULED 1"
**   ~~~   **  *   ~~~   * ...setpoint node conflicts with another setpoint manager.
**   ~~~   **  *   ~~~   * ...conflicting setpoint manager = SetpointManager:OutdoorAirReset:"AHU1 OUTLET SETPOINT"
**   ~~~   **  *   ~~~   * ...conflicting node name = AIR OUTLET NODE1
**   ~~~   **  *   ~~~   * ...control type variable = Temperature