Humidification to th energyplus model

Hello, I am using fan coil systems with boilers and chillers for simulating and I want to add humidity control to the building model, could you please guide me what all class lists do i need to assign to get humidifiy control to the model?

I have used Zonecontrol:Humidistat and Schedule:constant for now but after simulating with this class lists assigned to the model, it does not have any change than previous. it shows same load before and after applying this class lists.

I am missing something here, could you please let me know is this the correct way oy assigning or I need to assign extra class lists to make this run.

Thanks in advance...

In addition to the zone humidistat, you also need to add components to the air system serving the zone that add or remove moisture from the supply air. Dehumidification can be achieved by UnitarySystem's Dehumidification Control Type field, ZoneHVAC:Dehumidifier:DX, Dehumidifier:Desiccant:NoFans, or Dehumidifier:Desiccant:System. Humidification can be achieved with Humidifier:Steam:Electric or Humidifier:Steam:Gas.

See the following example files for reference:

5ZoneFanCoilDOAS_HumidifierOnOASystem.idf

5ZoneWaterCooled_GasFiredSteamHumidifier.idf

5ZoneWaterCooled_MultizoneAverageRHControl.idf

5ZoneWaterCooled_MultizoneMinMaxRHControl.idf

ASHRAE901_Hospital_STD2019_Denver.idf

ASHRAE901_OfficeLarge_STD2019_Denver.idf

ASHRAE901_OutPatientHealthCare_STD2019_Denver.idf

DesiccantCVRh.idf

DesiccantCVRhZoneRHCtrl.idf

DesiccantCVRhZoneRHCtrl_AddedAutosize.idf

SingleFamilyHouse_HP_Slab_Dehumidification.idf

WindACRHControl.idf

2.1k

ericmartinpe

answered 2024-03-04 10:34:14 -0500

edit flag offensive 0 remove flag delete link

Comments

add a comment see more comments

Question-and-Answer Resource for the Building Energy Modeling Community

Humidification to th energyplus model

Comments

1 Answer

Comments

Humidification to th energyplus model edit

Comments

1 Answer

Comments

Humidification to th energyplus model