Unmet Hours

Heat Pump - Water to Water - Cooling Does Not Link to the Condenser Loop [closed]

I'm modeling a cold water loop with OpenStudio 2.7. The loop has three water to water heat pumps on the supply side. The problem that I am facing is that the heat pump objects do not link to any condenser loop. I also tried to both substitute the object with chillers and to reduce the number of objects to one, but the problem still remains. Any idea on how to solve it?

Closed for the following reason "the question is answered, right answer was accepted" by Angelo Martucci 2019-02-20 02:53:21 -0500

Note

This method can be used for water-to-water heat pumps, water-cooled chillers, water-to-water heat exchanges, water heaters, and any other objects that can be connected to two different water loops.

Select the Heating Loop where you want the Heat Pump Water to Water (HPWtoW) on the Supply Side.
Select "Library" and drag a HPWtoW onto the Supply Side.
Rename the HPWtoW. In this example, it is renamed "HP Already On Supply Side." You don't technically need to do this, but it makes it easier to see that you are doing the following steps correctly.
Select the Condenser Loop where you want the HPWtoW on the Demand Side.
Select "My Model" and look in the HPWtoW section. You should see the renamed HPWtoW you already added to the Supply Side.
Drag this HPWtoW onto the Demand Side of the Condenser Loop.
If this has been done correctly, you should see black circles next to the HPWtoW icon on the loop. If you click these circles, you will jump back and forth between the Heating Loop and the Condenser Loop.