Energy consumption does not change with different wall construction

wall
construction
openstudio
retag add tags

I assigned three thermal zones and set up all the building construction in OpenStudio. when I run the simulation, I found the U-value of wall, roof and floor do not affect the total energy consumption of my model. No matter what U-value I use, the model output stays the same.

wendigoZ

asked 2018-12-09 21:18:53 -0500

4.4k

__AmirRoth__

updated 2018-12-27 10:08:36 -0500

edit flag offensive 0 remove flag close merge delete

Comments

It's possible that either constructions are not assigned correctly, or HVAC is not set up correctly so that it is not being affected by envelope (like missing thermostats).

egillmor (2018-12-10 09:19:27 -0500) edit

Can you send your files? Especially the E+ IDF file and the errors and warnings file.

Ehsank (2018-12-10 11:29:55 -0500) edit

Thank you both of egillmor and Ehsank for replying. here is my model: https://drive.google.com/open?id=1Npl...

also, when I export the model to IDF file, it says two of the spaces cannot be converted as they do not have a thermal zone. These two spaces are the overall layout of the building so I did not assign any thermal zone to them. Is it a problem?

warming:

Warnings occurred on translation to EnergyPlus

Warning: Space Space 101 is not associated with a ThermalZone, it will not be translated.

Warning: Space Space 1 is not associated with a ThermalZone, it wi

wendigoZ (2018-12-10 12:28:20 -0500) edit

I don't have the software to open a .rar file on this machine, but yes that is a problem.
This is an old tutorial but I think it's still valid. http://nrel.github.io/OpenStudio-user...

egillmor (2018-12-10 12:39:53 -0500) edit

Dear egillmor,

here is the link for all the file: https://drive.google.com/open?id=1QEO...

Done, I have set up all the thermal states and thermal zone. thank you. my result of energy consumption is double now. is it normal?

wendigoZ (2018-12-10 12:50:33 -0500) edit

add a comment see more comments

I checked your model. There was no thermal zone, construction set, and schedule set assigned to two of the spaces you had. After applying some values from your library (I picked them randomly since I don't have enough info about your model's properties), I increased the thermal conductivity of your "Netzero wall", which is the main wall assembly in your model and the total energy consumption bumped up accordingly. So, you should double check all the spaces you have and make sure correct properties are assigned to them. The rest of the model seems to be correct.