I made a simple model with the ideal air load system, I only want to see the room load in the natural situation. But the cooling load from the output report is 0. Can anyone give me some tips? I have set Cooling Thermostat Schedule
Make sure you define BOTH a Heating Thermostat Schedule AND a Cooling Thermostat Schedule, even if you have no heating (put the heating tstat schedule to 0°C or whatever). If you don't do that, the thermostat:dualsetpoint isn't created when the model is forward translated and you end up with no cooling and no heating.
thank you! I can get the cool load while I set the Heating Thermostat Schedule.
I'd appreciate it if you could upvote the answer if you found it helpful, and more importantly mark it as accepted since it solved your problem so that we can flag the thread as closed (please read the Help Page). Thanks.
Comments
You need to add more detail to this question in order for people to be able to give you meaningful answers. I also don't believe people are going to contact you via that email address.